About the Victoria Boiler Stove

SUITABLE FOR BOTH PRESSURISED AND VENTED SYSTEMS 

The 10kw Victoria boiler is a versatile, well built stove that is both affordable and built to last. Built in our European factory from quality materials, it allows users to heat their home and cook their food for a fraction of the cost of a conventional heating system. Many customers who have purchased this cooker in the past come back to us and tell us how they are relishing in the fact that they are saving so much money on their bills. The entire top of the stove is a hot plate (900 wide - 670mm deep). There is a removable circular disc above the firebox that uncovers a very hot area for quick boiling. The large oven on the right hand side has a shelf for cooking multiple dishes and is temperature controlled using a chrome lever. The Schott glass oven door has a built in thermometer for temperature regulation. 

Boiler Spec

The stove will supply around 4.63kw to the boiler and 5.61kw directly to the room. 

To calculate your heating requirements - An 5kw boiler equates to around 17,500 BTU (1kw = approx 3500 BTU.) - Your radiators will be measured in BTU. To calculate your requirements add up all of the BTUs of each radiator in the house.

Boiler rated at 2bar

The Victoria is designed to be used on an “unvented” heating system, however it can also be used on a vented system if required, and is rated for a working pressure of up to 2 bar. There are 2 primary flow connections, ( central heating and domestic hot water), and 2 primary return connections.  There is also a connection for a thermostatic probe and a Thermal Safety Valve which lets cold water in to the boiler in order to regulate the heat output. ( Please see images for a diagram of the rear pipes )

The flow and return for the safety coil are designed to be used in conjunction with a safety flush valve (TAS valve). The valve is connected to mains pressure cold water on the flow, the water is then discharged to waste /  drain on the return side. The TAS valve monitors the temperature of the water within the back boiler and in the event of over heating the TAS valve will open and flush cold water through the internal safety coil within the back boiler. The flush of cold water then flows out of the return to waste. The TAS Valve is not included with the stove and is something that we do not stock

This stove has the required CE,BSEN data plates on the back. The stove is also over 75% efficient, this means HUGE savings on fuel bills.

This covers the stoves body and not the internal perishable parts like grates and fire bricks. Wood burning stove guarantee is activated when the stove is invoiced. 6 digit number on the top of each invoice is the warranty number.

For the stove to be covered it must be installed by a HETAS engineer.

Overnight Burn

The Victoria has an excellent overnight burn system. Its air tight door gaskets and manually controlled air flow controls allow you to close the stove right down overnight and wake up to a warm house in the morning. All you will need to do is reopen the air controls, add a little coal or wood and watch the fire roar again.

Stove Features

Heat Output : 10Kw +
Pre-heated airwash system: Yes
Outlet : 6" (150mm) top only
Overnight burn : Yes, Very efficient and easy to achieve
Heat resistant glass: Yes, German Schott glass
Efficiency : 66.8%
Multifuel, Yes
Airwash : Yes
Steel : Yes

Finish : Heat resistant dark Grey
Approvals : EN Approved, CE approved
Guarantee : 2 year
Firebricks : Firebrick base
Bits and bobs : Oven glove, Ash pan, Full manual
Baffle plate : Yes
Spare parts available : Yes
Weight : 200 KG

Stove Dimensions :  Height 855mm - 33.7 inches Width 900mm - 35.5 inches Depth 670mm - 26.35 inches 

Stove Construction

Oven dimensions : Height 280mm - 11 inches Width 350mm - 13.75 inches Depth 420mm - 16.5 inches 

Distance to combustibles : Side: 300mm Rear 200mm Front: 800mm

Body - Steel plate with integral boiler hugging the stove chamber
Grate - Includes a virgin ore cast iron ash grate and steel ash pan
 

Why Are We So Cheap?

This is a common question we get asked and understand why people will sometimes wonder how it can be done so cheap. We design a large amount of our products and they come direct from our factory to us. This completely cuts out any middle men. We can stock over 2500 wood burning stoves at any one time and ship direct to the end user with no showrooms. We always suggest prospective buyers take a look at our glowing feedback that currently has over 7000 positive comments on our stoves and stove products.