class='row two-col-stove-description'>
class='col-xs-12 col-md-6'>
Offset 45 degree bend Flue Pipe
This ready made 45° offset has been designed to change the direction of the flue at the permitted angle by building regulation, reducing the number of joints in the flue.
Connection
Vitreous Enamelled flue parts have a male connection to push fit inside the pipe or stove outlet below to ensure deposits within the pipes run down into the stove and do not escape. The male connection is always fitted facing downwards as pictured. It is advisable to seal all single wall joints with a suitable high temperature sealant. It is safe to cut single wall flue down to size for a perfect fit.
Construction
Made of laser welded steel and also vitreous enamelled on the inside (total thickness of the steel + enamel 1.2 mm), this guarantees the resistance and stability of the colour even at very high temperatures classified as class T600, the highest according to EN1856-2
class='col-xs-12 col-md-6'>
Approvals
CE amd HETAS approved for use in the UK
Regulations
Designed for internal use, it is against regulations to pass single wall flue through any surfaces due to the heat emitted from the pipe. The safe clearance to combustibles is three times the diameter of the flue or one and a half times the diameter to non-combustibles. It is advised to limit a run of single wall flue to 2000mm to prevent the loss of heat through the pipe which can lead to flue gases dropping.
Dimensions
Offset - 100mm
Overall Height - 555mm
Height when male end is inside the stoves flue outlet - 505mm
SEE IMAGES
54 59.99 In Stock
Offset 45 degree bend Flue Pipe - 125mm - 5"
- Brand: Save Flue Italy
- Product Code: 5" 45 degree Offset
- Availability: In Stock
-
Price: £59.99
- Ex Tax: £49.99
Offset 45 degree bend Flue Pipe
This ready made 45° offset has been designed to change the direction of the flue at the permitted angle by building regulation, reducing the number of joints in the flue.
Connection
Vitreous Enamelled flue parts have a male connection to push fit inside the pipe or stove outlet below to ensure deposits within the pipes run down into the stove and do not escape. The male connection is always fitted facing downwards as pictured. It is advisable to seal all single wall joints with a suitable high temperature sealant. It is safe to cut single wall flue down to size for a perfect fit.
Construction
Made of laser welded steel and also vitreous enamelled on the inside (total thickness of the steel + enamel 1.2 mm), this guarantees the resistance and stability of the colour even at very high temperatures classified as class T600, the highest according to EN1856-2
Approvals
CE amd HETAS approved for use in the UK
Regulations
Designed for internal use, it is against regulations to pass single wall flue through any surfaces due to the heat emitted from the pipe. The safe clearance to combustibles is three times the diameter of the flue or one and a half times the diameter to non-combustibles. It is advised to limit a run of single wall flue to 2000mm to prevent the loss of heat through the pipe which can lead to flue gases dropping.
Dimensions
Offset - 100mm
Overall Height - 555mm
Height when male end is inside the stoves flue outlet - 505mm
SEE IMAGES
Calculate Delivery Fee
To find out how much your Delivery will cost, please complete the form below.
Please note that this is the price for delivery of Offset 45 degree bend Flue Pipe - 125mm - 5" only. The final amount might change depending on the contents of your shopping bag when you check out.